BAL – Tank It – Tanking Kit 5kg Powder and 5ltr Liquid
BAL – Tank It – Tanking Kit 5kg Powder and 5ltr Liquid

Rapid-setting, rapid-drying, two-part, highly polymer-modified waterproof cementitious based system for walls and floors, excludes scrim tape. Tile after 90 minutes

Providing a complete and easy to use waterproofing system for the protection of substrates (when used powder mixed with liquid) prior to fixing wall and floor tiles in dry or wet interior and exterior environments.

NOTE: Corners/edges must be reinforced with BAL TANKIT TAPE. Suitable for areas of total immersion such as swimming pools. Suitable for areas where/limited movement may occur (e.g. around drainage channels, junctions between walls/floors), and for preventing water penetration through suspended floors.

 

Coverage: Approximately 7m2 at 1mm thick per unit

May vary dependent on nature and flatness of the surface and on the trowel used.

 

Click here to view Specification sheet

 

£59.04 each

BAL APD Primer 2.5 Ltr
BAL APD Primer 2.5 Ltr

BAL Prime APD is a rapid-drying acrylic primer suitable for priming wall and floor backgrounds prior to the fixing of ceramics, mosaics and natural stone tiles in dry or wet interior and exterior environments. BAL Prime APD stabilises dusty surfaces and reduces the porosity of backgrounds and may be used undiluted on plaster walls and plasterboard, tongue and groove floorboards and anhydrite screed floors. Use diluted on plaster walls (if dusty or porous) and cement floors.

BAL Prime APD helps stabilise backgrounds prior to tiling in ultra-quick time, allowing for tiles to be fixed with a suitable adhesive in 15-30 minute and producing significant cost and time savings for your project. BAL Prime APD is suitable for a variety of projects including walls and floors, worktops, showers, heated screeds and areas with some movement or vibration.

Coverage: Approximately 10-20m2 per unit diluted / 5-10m2 per unit undiluted

Click here to view Specification sheet

£16.50 each

BAL Level Max 25kg
BAL Level Max 25kg

Single part self-smoothing compound.

Formulated with innovative Fibre Strand Technology (FST) for extra strength and flexibility, BAL Level Max is an all-in-one leveller that boasts a maximum bed depth of up to 80mm in a single application – the largest depth in the market – meaning it can easily level backgrounds with varying heights.

What’s more, BAL Level Max only requires a bed depth of 3mm over timber, whereas many alternate products in the UK require a minimum bed depth of 10mm. This means BAL Level Max can provide over three-times more coverage than these products.

Self-smoothing with excellent flow, BAL Level Max has a protein-free formulation and is pumpable for large commercial flooring projects.

Coverage: Approximately 0.2m2 at 3mm thickness per kilo / 2 – 80mm thickness setting time is approximately 3-4 hours at 20°C

Click here to view the Specification sheet

 

£19.99 each

BAL Max Flex Fibre White 20kg
BAL Max Flex Fibre White 20kg

BAL Highly flexible tile adhesive for walls and floor with FST (Fibre Strand Technology)

Standard setting and highly flexible, BAL Max Flex Fibre has been developed with our Fibre Strand Technology for improved flexibility and strength. With an extended open time of more than 40 minutes and a pot life of five hours, BAL Max Flex Fibre is suitable for use fixing most tile types (except natural stone). BAL Max Flex Fibre is recommended for large format wall tiles, areas of total immersion, heated screeds and plywood walls. Also suitable for installations subject to limited movement and vibration and for tiling on existing glazed ceramic tiles.

Coverage: Approximately 10m² using a round notched trowel on a drywall. (see specification sheet for more details)

Click here to view the Specification sheet

 

£41.23 each

BAL Pourable One 20kg
BAL Pourable One 20kg

BAL – Flexible and rapid-setting tile adhesive for floors

A pourable tile adhesive for floors, perfect for fixing large and small format ceramics, porcelain and vitrified tiles, most natural stones, terrazzo in dry or wet interior and exterior environments. Rapid-setting in three hours and highly flexible, it can be used up to 25mm bed thickness in one application and is ideal for patch repair. BAL Pourable One is ideal for underfloor and under tile heating, areas of total immersion, heated screeds and installations subject to limited movement and vibration.

Coverage: Dependant on the application, please see specification sheet for more details.

Click here to view the Specification sheet

 

£21.45 each

BAL Rapid Flex One 20kg
BAL Rapid Flex One 20kg

BAL – Flexible cementitious S1 wall and floor tile adhesive with FST (Fibre Strand Technology)

 

Enhanced with BAL Fibre Strand Technology (FST) for improved flexibility and strength, BAL Rapid-Flex One can be grouted after only three hours, and provides extended open time of 30 minutes and working time of 60 minutes. Available in new white technology and S1 classification, BAL Rapid-Flex One can be used on interior or exterior floors and walls to fix most tiles types, most natural stone, terrazzo, rigid foam insulating materials and brick slips. What’s more BAL Rapid-Flex One has a smoother consistency for easier mixing and application.

Coverage: Dependant on the application, please see specification sheet for more details.

Click here to view the Specification sheet

 

£18.55 each

BAL White Star Plus Ready Mixed Wall Adhesive 10ltr
BAL White Star Plus Ready Mixed Wall Adhesive 10ltr

A ready mixed wall tile adhesive, with up to 30 minutes open time.

Highly flexible and non-slip BAL White Star Plus is water-resistant and suitable for fixing certain ceramics, mosaics and porcelain tiles and some natural stone in dry or wet interior environments. Ready to use and easy to apply, it offers extended open-time of more than 30 mins, higher grab and higher bond strength.

BAL White Star Plus is one of the leading ready-mixed wall tile adhesives on the market, exceeding British and European standards. BAL White Star Plus offers excellent properties for the user including high bond-strength, excellent non-slip qualities, and lightweight rheology for easier and faster application. BAL White Star Plus comes in an enhanced white colour and can be grouted after 24 hours, making it perfect for domestic tiling projects including kitchens, splashbacks, bathrooms and showers.

Coverage: Approximately 5-6m2 per 10ltr unit

Click here to view the Specification sheet

 

£20.09 each