Our Online Store is operating normally and our customer service are available to assist you as usual Due to COVID-19 restrictions, some delivers may be delayed but we will ensure we keep you informed about your order.
Our Online Store is operating normally and our customer service are available to assist you as usual Due to COVID-19 restrictions, some delivers may be delayed but we will ensure we keep you informed about your order.
Showing 1–16 of 22 results
Minimises the time required to install uncoupling matting to timber, concrete and sand/cement screed subfloors, allowing tiling to commence immediately after the matting is laid. Unlike traditional powder adhesives, it has a high initial grab that prevents matting from curling for easy installation, is ready mixed and comes in a resealable container.
Unit Size Available: 14kg & 6kg
Coverage: Approximately 45m2 per 14kg unit
Click here to view Specification sheet
RRP £92.54 each
£75.27 each
Minimises the time required to install uncoupling matting to timber, concrete and sand/cement screed subfloors, allowing tiling to commence immediately after the matting is laid. Unlike traditional powder adhesives, it has a high initial grab that prevents matting from curling for easy installation, is ready mixed and comes in a resealable container.
Unit Size Available: 14kg & 6kg
Coverage: Approximately 19m2 per 6kg unit
Click here to view Specification sheet
RRP £35.46 each
£32.32 each
Coverage: Approximately 10m2 at 1mm thick per 10ltr unit
Click here to view Specification sheet
£26.31 each
P4 is a solvent-free primer for internal and external use on absorbent and non-absorbent backgrounds. It produces a textured surface and is especially effective in facilitating the adhesion of cement-based tile adhesives in tile-on-tile applications.
Coverage: Approximately 10m2 per 2kg unit
Click here to view Specification sheet
£21.78 each
P4 is a solvent-free primer for internal and external use on absorbent and non-absorbent backgrounds. It produces a textured surface and is especially effective in facilitating the adhesion of cement-based tile adhesives in tile-on-tile applications.
Coverage: Approximately 40m2 per 8kg unit
Click here to view Specification sheet
£77.04 each
P51 is a multi-purpose primer ideal for priming porous surfaces prior to the application of ARDEX water-based levelling and smoothing compounds and wood-based sheets and boards prior to the application of ARDEX X 7001 tile adhesive.
Coverage: Refer to the product datasheet
Click here to view Specification sheet
RRP £13.64 each
£10.80 each
P51 is a multi-purpose primer ideal for priming porous surfaces prior to the application of ARDEX water-based levelling and smoothing compounds and wood-based sheets and boards prior to the application of ARDEX X 7001 tile adhesive.
Coverage: Refer to the product datasheet
Click here to view Specification sheet
RRP £43.92 each
£29.80 each
X7 is a versatile multipurpose tile adhesive for fixing wall and floor tiles
Coverage: Approximately 5.1m2 at 3mm thick per 20kg unit
Click here to view Specification sheet
RRP £21.87 each
£15.52 each
X7 is a versatile multipurpose tile adhesive for fixing wall and floor tiles
Coverage: Approximately 5.1m2 at 3mm thick per 20kg unit
Click here to view Specification sheet
RRP £27.20 each
£17.30 each
X77 has an open time of up to 60 minutes, which means that you can spread larger areas of adhesive in a single application, enabling you to work more efficiently.
Coverage: Up to 8m2 per 20kg unit using an 8mm x 8mm trowel
Click here to view Specification sheet
RRP £37.46 each
£26.58 each
X7R is a rapid setting adhesive that allows tiles to be grouted and trafficked only 2 hours after fixing.
Coverage: Grey – approximately 4.7m2 at 3mm thick per 20kg unit; White – approximately 5.6m2 at 3mm thick per 20kg unit
Click here to view Specification sheet
RRP £25.46 each
£18.06 each
X7R is a rapid setting adhesive that allows tiles to be grouted and trafficked only 2 hours after fixing.
Coverage: Grey – approximately 4.7m2 at 3mm thick per 20kg unit; White – approximately 5.6m2 at 3mm thick per 20kg unit
Click here to view Specification sheet
RRP £32.96 each
£20.96 each
Standard setting and highly flexible, BAL Max Flex Fibre has been developed with our Fibre Strand Technology for improved flexibility and strength. With an extended open time of more than 40 minutes and pot life of five hours, BAL Max Flex Fibre is suitable for use fixing most tile types (except natural stone). BAL Max Flex Fibre is recommended for large format wall tiles, areas of total immersion, heated screeds and plywood walls. Also suitable for installations subject to limited movement and vibration and for tiling on existing glazed ceramic tiles.
Coverage: Approximately 10m² using a round notched trowel on a drywall. (see specification sheet for more details)
Click here to view the Specification sheet
£41.23 each
£19.11 each
£28.75 each
Tilemaster Setaflex Semi-Rapid is a polymer modified, flexible cement based floor and wall tile adhesive that has been specially developed to give an extended pot life of 90 – 120 minutes.
It has been developed for fixing a large variety of tiles such as ceramic, porcelain and natural stone tiles and the extended pot life is ideal when fixing large format and intricate tiles such as natural stone. The adhesive is fast setting and it will accept light foot traffic and grouting after 6 hours.
This is a flexible adhesive and it is ideal for fixing to substrates with limited movement and/or vibration such as plywood overlay and underfloor heating systems as well as for fixing to solid substrates such as concrete and sand/cement screed. Ideal for use in areas subject to prolonged or permanent wet conditions such as wet rooms and swimming pools. Tilemaster Setaflex Semi-Rapid can be used internally and externally and it is unaffected by frost after setting.
Coverage: 20kg will cover approximately 5 – 6 m² at 3mm bed application
Click here to view the Specification sheet
£17.17 each
Tilemaster Setaflex Semi-Rapid is a polymer modified, flexible cement based floor and wall tile adhesive that has been specially developed to give an extended pot life of 90 – 120 minutes.
It has been developed for fixing a large variety of tiles such as ceramic, porcelain and natural stone tiles and the extended pot life is ideal when fixing large format and intricate tiles such as natural stone. The adhesive is fast setting and it will accept light foot traffic and grouting after 6 hours.
This is a flexible adhesive and it is ideal for fixing to substrates with limited movement and/or vibration such as plywood overlay and underfloor heating systems as well as for fixing to solid substrates such as concrete and sand/cement screed. Ideal for use in areas subject to prolonged or permanent wet conditions such as wet rooms and swimming pools. Tilemaster Setaflex Semi-Rapid can be used internally and externally and it is unaffected by frost after setting.
Coverage: 20kg will cover approximately 5 – 6 m² at 3mm bed application
Click here to view the Specification sheet
£19.88 each
Tilemaster Standard Set Setaflex is a polymer modified, flexible standard setting cement based wall and floor tile adhesive with increased adhesion and non-slip properties. Formulated to give an extended pot life of approximately 3 – 4 hours, Tilemaster Standard Set Setaflex is ideal where longer working times are required.
Tilemaster Standard Set Setaflex has been specially formulated for fixing a large variety of tiles including ceramic, porcelain and natural stone tiles to substrates subject to limited movement and/or vibration such as plywood overlay, timber framework and underfloor heating systems as well as for fixing to solid substrates such as concrete and sand/cement screed.
Tilemaster Standard Set Setaflex is ideal for areas subject to prolonged or permanent wet conditions such as swimming pools and wet rooms. Tilemaster Standard Set Setaflex can be used internally and externally and it is unaffected by frost after setting.
Coverage: 20kg will cover 5 – 6m² at 3mm thin bed application
Click here to view the Specification sheet
£15.29 each
Tilemaster Standard Set Setaflex is a polymer modified, flexible standard setting cement based wall and floor tile adhesive with increased adhesion and non-slip properties. Formulated to give an extended pot life of approximately 3 – 4 hours, Tilemaster Standard Set Setaflex is ideal where longer working times are required.
Tilemaster Standard Set Setaflex has been specially formulated for fixing a large variety of tiles including ceramic, porcelain and natural stone tiles to substrates subject to limited movement and/or vibration such as plywood overlay, timber framework and underfloor heating systems as well as for fixing to solid substrates such as concrete and sand/cement screed.
Tilemaster Standard Set Setaflex is ideal for areas subject to prolonged or permanent wet conditions such as swimming pools and wet rooms. Tilemaster Standard Set Setaflex can be used internally and externally and it is unaffected by frost after setting.
Coverage: 20kg will cover 5 – 6m² at 3mm thin bed application
Click here to view the Specification sheet
£17.64 each
Trade FlexiRapid is a polymer modified, flexible rapid setting cement based floor and wall tile adhesive with increased adhesion and non-slip properties. Trade FlexiRapid has been specially formulated for fixing a large variety of tiles including ceramic, porcelain and natural stone tiles to well prepared substrates that may be subject to limited movement and/or vibration such as plywood overlay and underfloor heating systems as well as for fixing to solid substrates such as concrete and sand/cement screed. Its rapid setting capability allows for light foot traffic and grouting after 3 hours. Trade FlexiRapid can be used internally and externally and it is unaffected by frost after setting
Coverage: 20kg will cover 5 – 6m² at 3mm thin bed application
Click here to view the Specification sheet
£14.91 each
CALL: 